1.5″ Dewaxing Closed Column Extractor 90-270g

DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. DO NOT USE INDOORS

*Note:  Column capacity may vary depending on the biomass density, moisture content and column packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity.  Low density, uncut, heavily dried, and/or lightly packed material can reduce capacity by 50%. 
For best results, we recommend to tightly pack coarse ground material.

Shop Dewaxing Closed Column Extractor

Key Features and Description:

• Dewaxing Spool Included for filter out and coagulating waxes and lipids.
• Compound Gauge with (-30)-160 PSI readout.

• Closed Column Pressure Extractor (Comes with 1 yr. Limited warranty, excludes gaskets and screens)

• This system allows the user to build up solvent pressure by closing the valve, pulling a vacuum and filling the extractor, Extractor will fill about 85% with solvent before the internal pressure will equal the pressure of the can propellant.

• The solvent can will fit into either port with a tip adapter supplied with some butane cans, tip adapter required, not included

• Solvent Soak is expected to be between 30-90 min, but this all depends on material, starting with frozen cans of solvent is recommended

• This system allows the user to soak the material before opening the bottom valve to release the solvent and oil.

---

ProfessionalKit Adds the following:

• Compound Gauge
• Sight Glass
• Shower Head

Explorer Kit Automatically Includes:

• 8″ x 8″ Platinum Cured Silicone Non-Stick Pad

• 1.5″ Dewaxer Tri-Clamp 304 Stainless Steel Material Tube

• Dewaxer Spool Sizes Specifications:

• 1.5″ x 12″ Dewaxer = 90G

• 1.5″ x 18″ Dewaxer= 135G

• 1.5″ x 24″ Dewaxer= 180G

• 1.5″ x 36″ Dewaxer = 270G

• 304 Stainless Steel Flare End Caps with Heavy Duty Stainless Steel Miniature Ball Valves

• 1/4″ Stainless Steel MNPT Drain Plug

• (1) 1.5″ Standard Pressure Tri-Clamp Clamps

• 1.5″ Tri-Clamp Quadpod

• (2) Buna-N Tri-Clamp Gaskets

• Buna-N 100 Mesh (150 Micron) Gasket

***Note: Parts and components can be subject to substitutions. Any substituted parts will have the same function and will be of equal or greater value.****

Cylinder Volume

Radius (in)1.5″2″3″4″6″8″10″12″Length (in)
Volume (in³)

Select Material

Butane ISO-Butane Propane

How Much Will Fit in Cylinder

Formula
Volume x Weight of Water x Specific Gravity

Constants
Weight of Water = 0.0360 (lbs / in³)
Specific Gravity of =

Lbs. of : Recommended:
Account for an 80% fill to avoid a hydraulic lock 

How Much Material Will Fit in the Cylinder

Volume

Packing Density (g)	2.5	3	3.5	4.3
Grams of Material
Lbs. of Material

Cans of Butane by Size

Pounds of Butane

mL	fl oz	lbs	of Cans
420	14.2
300	10.1
200	6.7
150	5.07